RF 2.4G Dual White Remote Control CCT

1. Product photo 2. Features: 1 ) Working voltage: 4.5(AAA*3) ; 2 ) Adopt RF 2.4GHz wireless control, remote control distance is long and no directional 3 ) Full touch panel design, unique interface, and easy to operate. 4 ) Work stable, low power consumption, long standby time 5 ) SWC-CCT-2.4G...

Product Details

1. Product photo

图片18.JPG

2. Features:

1Working voltage: 4.5(AAA*3)

2Adopt RF 2.4GHz wireless control, remote control distance is long and no directional

3Full touch panel design, unique interface, and easy to operate.

4Work stable, low power consumption, long standby time

5SWC-CCT-2.4G compatible with HC series CCT dimming drivers

63 years warranty

3. Technical Parameters

Working temperature

-20-60

Working voltage

4.5V AAA*3PCS

Standby current

14uA

Emission current

17mA

standby power

0.063mW

Emission power consumption

0.0765W

Net weight

90g

Dimension

L113*W55*H22 (mm)

RF distance

≤20m

RF frequency

2.4GHz

Dimming level

4096

Battery Life

1year

 

4. Direction for use

1Each buttons function as below:

图片19.png 

Name of key

Description

Remark

ON

ON in any time

OFF

OFF in any time

Mode

The mode will move to next, when touch the key each time

3 modes

Brightness +

Increase the brightness in static mode(from the minimum brightness to maximum brightness need long press for 6s)

Long-press can get fast adjusting.

Brightness -

Reduce the brightness in static mode(from the maximum brightness to the minimum brightness need long press for 6s)

Long-press can get fast adjusting.

Color Ring

Touch any color temperature which you want

Induction lamp

Show the corresponding brightness and color when you touch the color ring

3 modes in total as below:

NO

Patterns

Remark

1

Cool white

Brightness is adjustable

2

Warm white

3

Pure white

 

2Match code and clear code operation

Matching code operation

Driver can be controlled by any one the same remote as factory default; remote control delivered with unique RF code as factory default; if unique-control is needed, please matching the code before installation and using.

1. Step 1: Connect the driver with load LED(Without power on)

2. Step 2: Pressing key “Mode” and hold on, power on the driver, the load LEDs will be 50% brightness white as responding. Means entered the learning code/ clear code status successfully.

3. Step 3:Continuously to press the key “ON” for 3 times within 3 seconds after step 2 ,the brightness of LEDs will change from 25%-10%-back to preset level. Code learning successfully, the LEDs will be back to the status before the power off.

4. If not, please re-operate from step 1 to 3. Notice: Power on again the driver to enter the code learning status should be 10s after last power-down

 

Clear code operation

For backing to factory default, driver can be controlled by any one the same remote control.

1. Step 1: Connect the driver with load LED(Without power on)

2. Step 2: Pressing key “Mode” and hold on, power on the driver, the load LEDs will be 50% brightness white as responding. Means entered the learning code/ clear code status successfully.

3. Step 3: Continuously to press Brightness -3 times within 5 seconds after step 2 ,the brightness of LEDs will change from 25% -10% as responding. Code clearing successfully, the LEDs will be back to the status before the power off.

4. If not, please re-operate from step 1 to 3. Notice: Power on again the driver to enter the code learning status should be 10s after last power-down  

Notice

1Each driver can save 4 different RF codes ( it means each driver can be controlled by 4 different-code remote in the Max).If there is confusion,, more remote control all can control, you need to clear the code and then use the specified remote control re-code with the driver.

2Anyone the same model remote control or the remote control not the same model but compatible with each other can be used to clear code. 

Inquiry