RF 2.4G Dimming Remote(DIM)

1. Product photo 2. Features: 1 ) Product supply voltage is 3V(AAA*2) ; 2 ) Adopt 2.4G wireless control, with feature of long distance and non-directional control ; 3 ) Full keys design, unique interface, simple operation ; 4 ) Work stable, low power consume, long standby time ; 5 )...

Product Details

1. Product photo 

 图片16.png

2. Features:

1Product supply voltage is 3V(AAA*2)

2Adopt 2.4G wireless control, with feature of long distance and non-directional control

3Full keys design, unique interface, simple operation

4Work stable, low power consume, long standby time

5RFBT-DIM-2.4G match with HD series dimming driver

63 years warranty.

3. Technical Parameters

Working temperature

-20-60

Working voltage

3V AAA*2PCS

Sleep current

18uA

Emission current

25mA

Sleep power consumption

54uW

Emission power consumption

75mW

Net weight

65g

Dimension

L150*W40*H20 (mm)

RF distance

≤30m

RF frequency

2.4Ghz

Dimming level

4096

Battery Life

2 years

 

4. Direction for use

1function of each key as below

图片17.png

Name of key

Description

Set button

Available at night light state, long press 10s enter night light brightness setting, after setting night light, press again to save the night light setting. 

ON

ON in any time

OFF

OFF in any time

Brightness +

Increase light brightness( from darkest to brightest long press 6 seconds)

Brightness -

decrease light brightness( from brightest to darkest long press 6 seconds)

Hot brightness key +

10%30%70%100%  4 levels brightness selection key,  lights will go to last one after each pressing.

Hot brightness key -

10%30%70%100%  4 levels brightness selection key,  lights will go to last one after each pressing.

Mode key

100% static

Night light

5% brightness

Timing Mode A /B

Adjust the preferable light effect, long press timing key for more than 3 seconds, the lights will gradually change once, that is saved successfully

Delay button

Press this keylight will flash twiceOutput will off after 30 automatically, this function could be canceled by On/Off Keys

2Way of match code and clear code

Matching code operation

Factory defaults driver could be controlled by any same model remoteincluding different model but compatible remotes),Factory defaults remote with unique codeIf unique-control or new-coded-remote is needed, pairing the remote and the receiver as below operation instruction before using:

Step 1connect driverwithout power on);

Step 2Pressing key “Set” and hold on, power on the controllerthe load LEDs will be 50% brightness white as responding to enter match code/clear code state);

Step 3Continuously to press the key “Mode” for 3 times within 5 seconds after step 2the brightness of LEDs will change from 25%-10%-back to preset level as responding);

If learning code unsuccessfully, please re-operate above stepsNotice“Power on driver to enter match code/clear code state” should after at least 10 seconds from the last time power off

 

Clear code operation

Back to factory default, driver can be controlled by any one the same model remote control.including different model but compatible remotes

Step 1Connect driverwithout power on);

Step 2Pressing key “Set” and hold on, power on the controllerthe load LEDs will be 50% brightness white as responding to enter match code/clear code state

Step 3Continuously to press the key “Delay button“ for 3 times within 5 seconds after step 2the brightness of LEDs will change 25%-10%-back to preset level as responding);

If clear code unsuccessfully, please re-operate above stepsNotice“Power on driver to enter match code/clear code state” should after at least 10 seconds from the last time power off.

Notice

1) Each driver can save 4 different RF codes , it means each driver can be controlled by 4 different-code remote in the Max. If there is distortion on the application, could clear code for driver, and then re-code and configure with the planned remote

2Any same model or different model but with compatibility remote could clear code.

Inquiry