It adopts the most advanced PWM (Pulse Width Modulation) digital control technology, It is constant voltage led full-touch wall panel CCT controller, specially designed for CW+WW Led lighting. For instance, Led module, flexible Led strip, etc. To select the desired light levels or color-temperature by the wall panel controller. It has many advantages such as beautiful appearance , easily to install, and simply to use. The dimension and structure of the wall panel are in line with the 120-type US standard.
● Designed for CW+WW constant voltage LED lights, Working voltage DC12-24V.
● Two channels output, Max. load current: 2CH*4A; Max. load power: 96W/12V; 192W/24V.
● The wall panel adopts the capacitive touch-sensitive design, unique appearance and easy-operation.
● Memory function, each time power-on reserve the mode which stop in the last power-down.
● Amplifier is available to achieve more LEDs sync-control.
● Structure/dimension/installation of the wall panel according to the 120-type US standards.
|Working temperature||-20-60℃||Working voltage||DC 12~24V|
|Static power consumption||<1W||Connecting mode||Common anode|
|Gray scale||256 levels||PWM frequency||700Hz|
|External dimension||L120*W74*H38mm||Packing dimension||L150*W90*H60mm|
|Output||2 channels||Max. Output current||4A*2CH|
|Max. Output power||12V:96W, 24V:192W|
Wall-panel Installation instruction
|Step 1: Fixing the bottom cover into the wall;|
Step 2:Fixing the metal frame into the bottom cover with screws( projecting part upward )
|Step 3: Pressing the wall-panel into the metal frame, after connecting well the input and output wires.|
Direction of use
Connecting the load wire at first, followed by the power wire;
Please ensure short circuit can not occur between wires before you turn on the power；
1.Function of the touch panel
|ON/OFF||Turn on/off the light.||This button is designed with backlight, convenient for users locate it in dark environment|
|Brightness +||Brightness add key, each touch add 1 level, 256 levels in total.||Long- press for fast adjusting|
|Brightness -||Brightness reduce key, each touch reduce1 level .||Long-press for fast adjusting|
|CW balance key||balance to cool white||Long-press for fast adjusting. The sum of two channels output power remains constant when CCT balanced.|
|WW balance key||balance to warm white|
|Delay off||Delay off the lights in 30 seconds|
|Night light||Night light hot key||Brightness of night light is 5%|
2.Adopt RF2.4G remoter to control the led controller, the function of each button as the table below:
|Set button||For setting the night light and matching code with receiver. Under night light mode, press “Set button” and hold on for 10 seconds will go into the night light setting. Press the set button again to save the setting and quit out.|
|Brightness +||The brightness will add 1 level after each time press. Long-press can get fast adjusting.|
|Brightness -||The brightness will reduce 1 level after each time press. Long-press can get fast adjusting.|
|CW balance key||Balance to cool white. Long-press can get fast adjusting.|
|WW balance key||Balance to warm white. Long-press can get fast adjusting.|
|Mode||Hot key for 3 CCT full-light: 100% CW, 100% WW, 100%CW+100%WW, and 4 dynamic modes.|
|Night light||Press the button go to night light mode（night light Setting：Under night light mode, press “Set button” and hold on for 10 seconds will go into the night light setting, press the left button to down the brightness, press the right button to up the brightness. Adjustable range: 1%-10%.）|
|Speed +||Add the speed of dynamic mode. Long-press can get fast adjusting.|
|Speed -||Reduce the speed of dynamic mode. Long-press can get fast adjusting.|
|Delay button||The light will be delay off in 30 seconds.|
Product information for placing order
|Product name||Item number|
|Wall panel CCT controller||HX-LWP120-RFBT-CCT|