HX-IRBT002-DIM IR BT remote sync controller-DIM HX-IRBT002-DIM, adopts the advanced micro control unit, it is used for controlling constant voltage LED lamps. For instance, point source of light, flexible light strip and so on; Belong to low-voltage DC power input and output with four...
IR BT remote sync controller-DIM
HX-IRBT002-DIM, adopts the advanced micro control unit, it is used for controlling constant voltage LED lamps. For instance, point source of light, flexible light strip and so on; Belong to low-voltage DC power input and output with four interfaces, including V+ is the common positive interfaces, the other three for the negative interface. Meanwhile, you can turn on/off, adjust brightness for different lighting effects through infrared 14keys remote control. In addition, It is convenient to use RJ45 connector to connect the multiple controllers together, and achieve the synchronization function of thousands meters led strips. In theory, they can be connected numerous.
●Designed for single color constant voltage LED lights, Working voltage DC12-24V.
●Three channels output, Max. load current: 3CH*8A; Max. load power: 288W/12V; 576W/24V.
●Adopts IR 14keys remote control with fashion appearance, distance up to 10 meters in the open air.
●Memory function, each time power-on reserve the mode which stop in the last power-down;
●3 modes in total, including static colors and 2 dynamic changes.
●The brightness of static color is adjustable, 256 levels in total; the speed of dynamic changes is adjustable, 100 levels in total.
●Long-press the brightness and speed key can get the fast adjustment, convenient for operation.
●Multiple controllers can work synchronically when connected by network cable through the RJ45 connector, the network cable between 2 ports up to 80 meters.
●Warranty of this product is one year, exclude the artificial situation of damaged or overload working.
Static power consumption
Up to 10M
Direction for use
Connect the load wire at first, followed by the power wire; Please ensure short circuit can not occur between wires before turning on the power；
Operation: to ensure that there is no barrier between the remote controller and the receiver.
The signal light flash-- represents the signal has been received well;
The function of buttons are shown as below:
The brightness will add 1 level after each time press. Long-press can get fast adjusting.
The brightness will reduce 1 level after each time press. Long-press can get fast adjusting.
Hot brightness key +
4 levels brightness (10%、30%、70%、100% ) hot selection key, lights will go to next one after each pressing.
Hot brightness key -
4 levels brightness (10%、30%、70%、100% ) hot selection key, lights will go to last one after each pressing.
3 modes in total: 100% static, flash, breathe
Press the button go to night light mode（night light Setting：Under night light mode, press “Set button” and hold on for 10 seconds will go into the night light setting, press the left button to down the brightness, press the right button to up the brightness. Adjustable range: 1%-10%.）
Add the speed of dynamic mode. Long-press can get fast adjusting.
Reduce the speed of dynamic mode. Long-press can get fast adjusting.
The light will be delay off in 30 seconds.
Application Circuit 1:
Application Circuit 2:(Synchronization function with network Line )
Product information for placing order
IR BT remote sync controller-DIM