2.4GHz Wireless Dimming Wall Panel Remote (DIM)

1. Product photo 2. Product Feature 1 ) Product supply voltage is AC90-265V , any other adapter is not required ; 2 ) Adopt 2.4G wireless control, with feature of long distance and non-directional control ; 3 ) Full touch panel design, unique interface, simple operation ; 4 ) Product structure,...

Product Details

1. Product photo

图片1..JPG

2. Product Feature

1Product supply voltage is AC90-265Vany other adapter is not required

2Adopt 2.4G wireless control, with feature of long distance and non-directional control

3Full touch panel design, unique interface, simple operation

4Product structure, size and install way are all compliance with European standard.

5HX-HWP86-DIM-2.4G match with HD series dimming driver

63 years warranty.


3. Technical Parameters

 

Working temperature

-20~60

Working voltage

AC90-265V(50/60Hz)

Standby power

<0.2W

Working power

<2W

RF frequency

2.4GHz

RF distance

20M

Dimension

W86*L86*H32mm

Packing Size

W89*L89*H34mm

Net weight

120g

Gross weight

130g

 

4. Connection diagram

图片2.png 

5. Wall-panel Installation instruction

Step 1: Fixing the bottom cover into the wall; 

 Step 2:Fixing the metal frame into the bottom cover with screws( projecting part upward )

图片3.png
图片4.png
Step 3: Pressing the wall-panel into the metal frame, after connecting well the input and output wires.
图片5.png图片6.png

 

6. Direction of Use

1 Key FunctionTotal 5 keys1 Dimming Ring, function of each key as below:

 图片5441.png 

Name of key

Instruction

Remarks

ON

ON in any time


OFF

OFF in any time


Mode

100% brightness

Full brightness shortcut key

Brightness +

Increase light brightness ( from darkest to brightest long press 6 seconds)

Long press realized fast adjustment

Brightness -

Increase light brightness ( from darkest to brightest long press 6 seconds)

Long press realized fast adjustment

CCT Ring

Touch any brightness which you want


2Way of match code and clear code

Matching code operation

Factory defaults driver could be controlled by any same model remoteincluding different model but compatible remotes),Factory defaults remote with unique codeIf unique-control or new-coded-remote is needed, pairing the remote and the receiver as below operation instruction before using:

Step 1Connect driverwithout power on);

Step 2Pressing key “Mode” and hold on, power on the controllerthe load LEDs will be 50% brightness white as responding to enter match code/clear code state);

Step 3Continuously to press the key “ON “ for 3 times within 5 seconds after step 2the brightness of LEDs will change 25%-10%-back to preset level as responding);

If match code unsuccessfully, please re-operate above stepsNotice“Power on driver to enter match code/clear code state” should after at least 10 seconds from the last time power off.

 

Clear code operation

  Back to factory default, driver can be controlled by any one the same model remote control.

including different model but compatible remotes.

Step 1Connect driverwithout power on);

Step 2Pressing key “Mode” and hold on, power on the controllerthe load LEDs will be 50% brightness white as responding to enter match code/clear code state);

Step 3Continuously to press the key Speed/Brightness - “ for 3 times within 5 seconds after step 2the brightness of LEDs will change 25%-10%-back to preset level as responding);

If clear code unsuccessfully, please re-operate above stepsNotice“Power on driver to enter match code/clear code state” should after at least 10 seconds from the last time power off.

 

Notice

1) Each driver can save 4 different RF codes , it means each driver can be controlled by 4 different-code remote in the Max. If there is distortion on the application, could clear code for driver, and then re-code and configure with the planned remote

2Any same model or different model but with compatibility remote could clear code.


Inquiry