2.4G Wireless Wall Panel Remote Control CCT

1. Product photo 2.Features: 1 ) Input: AC90-265V, do not need to make changes to the original wiring 2 ) Adopt RF 2.4GHz wireless control, remote control distance is long and no directional 3 ) Full touch panel design, unique interface, and easy to operate. 4 ) The structure and dimension...

Product Details

1. Product photo

图片1.JPG

2.Features:

 

1Input: AC90-265V, do not need to make changes to the original wiring

2Adopt RF 2.4GHz wireless control, remote control distance is long and no directional

3Full touch panel design, unique interface, and easy to operate.

4The structure and dimension according to the 86-type European standards.

5HX-HWP86-CCT-2.4G compatible with HC series CCT dimming drivers

63 years warranty

3. Technical Parameters

 

Working temperature

-20~60

Working voltage

AC90-265V(50/60Hz)

Standby power

<0.2W

Working power

<2W

RF frequency

2.4GHz

RF distance

20M

Dimension

W86*L86*H32mm

Packing Size

W89*L89*H34mm

Net weight

120g

Gross weight

130g

 

4. Connection diagram

图片2.png 

5. Wall-panel Installation instruction

Step 1: Fixing the bottom cover into the wall; 

 Step 2:Fixing the metal frame into the bottom cover with screws( projecting part upward )

图片3.png
图片4.png
Step 3: Pressing the wall-panel into the metal frame, after connecting well the input and output wires.
图片5.png 图片6.png

 

6. Direction for use

1) One dimming ring and 5 function buttons. Each buttons function as below:

 图片7.png 

Name of key

Instruction

Remarks

ON

ON in any time

OFF

OFF in any time

Mode

The mode will move to next, when touch the key each time

3 modes in total.

Brightness +

The brightness will +1, when  touch the key each time

Long-press can get fast adjusting.

Brightness -

The brightness will -1, when touch the key each time

Long-press can get fast adjusting.

CCT Ring

Touch any color temperature which you want


3 modes in total as below:

NO

Patterns

Remarks

1

Static cool white

Brightness is adjustable

2

Static warm white

Brightness is adjustable

3

Pure white

Brightness is adjustable 

2Match code and clear code operation

Matching code operation

Driver can be controlled by any one the same remote as factory default; remote control delivered with unique RF code as factory default; if unique-control is needed, please matching the code before installation and using.

1. Step 1: Connect the driver with load LED(Without power on)

2. Step 2: Pressing key “Mode” and hold on, power on the driver, the load LEDs will be 50% brightness white as responding. Means entered the learning code/ clear code status successfully.

3. Step 3:Continuously to press the key “ON” for 3 times within 3 seconds after step 2 ,the brightness of LEDs will change from 25%-10%-back to preset level. Code learning successfully, the LEDs will be back to the status before the power off.

4. If not, please re-operate from step 1 to 3. Notice: Power on again the driver to enter the code learning status should be 10s after last power-down 

 

Clear code operation

For backing to factory default, driver can be controlled by any one the same remote control.

1. Step 1: Connect the driver with load LED(Without power on)

2. Step 2: Pressing key “Mode” and hold on, power on the driver, the load LEDs will be 50% brightness white as responding. Means entered the learning code/ clear code status successfully.

3. Step 3: Continuously to press Brightness -3 times within 5 seconds after step 2 ,the brightness of LEDs will change from 25% -10% as responding. Code clearing successfully, the LEDs will be back to the status before the power off.

4. If not, please re-operate from step 1 to 3. Notice: Power on again the driver to enter the code learning status should be 10s after last power-down 

 

Notice

1Each driver can save 4 different RF codes ( it means each driver can be controlled by 4 different-code remote in the Max).If there is confusion,, more remote control all can control, you need to clear the code and then use the specified remote control re-code with the driver.

2Anyone the same model remote control or the remote control not the same model but compatible with each other can be used to clear code.

Inquiry